Language selection

Purchasing program

Our global purchasing program is considering the following key commodities:

Aluminium Parts

  • Out of alloys like EN AC-47100 / AISi12(Cu), EN AC-46000 / AISi9Cu3 and EN AC-43400 / AlSi10
  • Engine compartment components such as  ETC / EGR housings or various pump housings
  • Part weight between 200 grams and 1000 grams
  • Technology: high pressure die casting and gravity casting
  • Secondary operations like machining and leak testing

    Plastic & Hybrid Parts

    • Out of PPS, PBT, PA66 and other resins
    • Hybrid parts (plastic parts with lead frames and electronics such as sensors or PCBs)
    • Plastic part assemblies such as vacuum actuators or suction connectors for vacuum pumps
    • Gear wheels
    • Impellers

    Electronic Parts

    • Passive electrical components:  Chokes, capacitors, resistors, diodes, heating elements (PTCs) and load resistors
    • Electronic modules: assembled PCB's (flex and rigid), thickfilm hybrids, DBC power modules (Direct Bonded Copper - substrates)
    • Sensors for movement, temperature, pressure, flow
    • ASICs, ASSPs and Microprocessors  (Application Specific Integrated Circuit,  Application Specific Standard Products)
    • Brush cards for DC – motors: assembled with chokes, circuit braker, capacitors, contact - elements and brushes

      Coils

      • PA 66 overmoulded coil body pre assemblies consisting out of
        - Copper wound PA 6 coil bodies
        - Electrical components (resistors, NTCs or diodes)
        - Ferromagnetic circuit
        - Turned parts

      Sintered Parts

      • Gears and gear modules
      • Pulleys
      • Pump components e.g. setting rings, vanes and rotors
      • Secondary operations, e.g. mechanical processing, heat / surface treatments

      Stamping & Deep Drawing Parts

      • Out of cold or hot rolled coil steel, stainless steel, electrical steel, aluminum, other alloys
      • Brackets
      • Flaps (e.g. for throttle bodies)
      • Interlocked lamination stacks
      • Deep drawn housings
      • Pulleys
      • Covers for pumps
      • Vanes

      Turned Parts

      • Out of machining- / stainless steel, alloyed or carbon steels, brass
      • Diameter between 2 and 25mm
      • Technology: Single/multiple spindle, as well as rotary transfer and milling
      • Secondary operations like grinding, polishing, additional treatments (coating, hardening)

      DC motors

      • Used for main applications such as EGR and ETC
      • Outer Diameter: 28 to 31mm
      • Length: 42 to 54mm
      • Torque: 13 to 22 (mNm)
      • EMC protection

      Become a supplier

      We are looking for high-performance suppliers!

      Conditions
      Online Form