The compact RHEINMETALL RX pro AIR PURIFIER is a mobile, low-noise filter and disinfection unit that purifies and decontaminates the air in schools, offices, cleanrooms and any indoor environment where bioaerosols like viruses, bacteria, pollen and particulate matter need to be reliably filtered out.
Fully assembled, the device is ready to operate immediately. The easy-to-use control unit allows ventilation adjustment as needed for a complete decontamination and filtration of the air.
Moreover, the device is designed for maximum ease of maintenance. Changing the filter is easy, with no tools required. The ventilation level in the air outlet grid on the upper side of the device can be adjusted in accordance with the desired air stream direction.
The RHEINMETALL RX pro AIR PURIFIER is non-polluting, efficiently removing germs and dust from the air with no need for chemicals. It also helps to save energy by avoiding the loss of warmth that results from frequent ventilation.
How do we do it?
Large amounts of air are sucked into an intake vent on the underside of the RHEINMETALL RX pro AIR PURIFIER device. The air then undergoes several stages of filtration before being released back into the room.
The device features highly efficient, high-performance HEPA filters (H13 or H14) of the kind used, for example, in operating rooms, intensive care units and laboratories. In line with DIN EN 1822, these filters effectively capture >99.95% (H13) and >99.995% (H14) of all particulate matter and bioaerosols (viruses, bacteria).
As an option, the RHEINMETALL RX pro AIR PURIFIER can conduct regular decontamination of the filters by means of non-thermal plasma-ionized air, which kills all viruses and bacteria.
IMPORTANT: No harmful ozone pollution for the environment through regular filter disinfection.
- compact design (560 x 460 x 1,060 mm)
- robust, tilt-proof and suitable for mounting on walls
- designed for use in large rooms, e.g. in schools and day care centres
- very quiet
- easy-to-use touchscreen operator interface
- 3 filter systems
- air filtration only
- 2 prefilters for optimum HEPA filter life
- no filter heating, no disturbing odours
- no accumulation of bacteria or viruses in the filter or hygienic filters thanks to regular HEPA filter disinfection without heating
|Ionization module||optional non-thermal plasma (NTP) for filter disinfection|
|Exchange of optional ionization module||every 14,000 hours|
|Prefilter||G4 filter for coarse particles EN 779-2012|
|Secondary filter||F7 filter for coarse particles EN 779-2012|
|High-performance filter||HEPA H13/H14 DIN EN 1822|
|Ventilator/motor||electronic EC motor; fan propeller with backward curved blades|
|Minimum processing capacity (m3/h)||400|
|Maximum air stream with H13 filter (m3/h)||1,200|
|Ventilation type||from bottom to top|
|Filter exchange /saturation indicator||3 pressure sensors, one per filter|
|Dimensions (mm)||560 x 460 x 1,060 (model on rollers) - 560 x 425 x 950 (wall-mounted model)|
|Power supply voltage||230 V / ~1 / 50 Hz|
|Typical power consumption (kW)||0.25|
|Maximum power consumption (kW)||0.6|
|Sound pressure level (dB)A||15 (400 m3/h) - 40 (900 m3/h)|